Configuration Management Articles
Published articles recommended by CMPIC LLC
Software and IT Articles
Carnegie Mellon Software Engineering Institute CM and Related Articles http://www.sei.cmu.edu/library/abstracts/reports/87cm004.cfm
Capability Maturity Model® Variants http://sepo.spawar.navy.mil/CMM_Variants.html
Dr. Dobbs World of Software Development http://www.samag.com/
Software Configuration Management for the Web http://www.methodsandtools.com/archive/archive.php?id=3
Parallel Development Strategies for Software Configuration Management http://www.methodsandtools.com/archive/archive.php?id=12 Document Management Magazine http://www.docmanage.com/
Quality Articles
The Business Improvement Journal from Quality Resources - Australia http://busimprove.com/technical-library.htm
American Society for Quality (ASQ) http://www.asq.org
General CM Articles
CM Crossroads Journal http://www.cmcrossroads.com
APICS- The Performance Advantage, Sept 1998, Vol 8, No 9, "Document Management- From Certification to Online Conversion"
Association of Computing Machinery, Proceedings of the ACM SIGSOFT/ SIGPLAN Software Engineering Symposium on Practical Software Development Environments. 1988, New York: ACM Press.
Association of Computing Machinery, Proceedings of the Second International Workshop on Software Configuration Management, Princeton, NJ, 10/24/89. New York: ACM Press.
2nd International Workshop On Software CM, 1989, ISBN 0-89791-334- 5, IEEE Computer Society Press.
Engineering Dept Management- Administration Report, August 1998. Issue 98-8. "How Configuration Management Speeds Product Development". Published by the Institute of Management Adminstration, Inc.
Allan, George, CM & Its Impact on Businesses that use Computer Platforms, ACDM Journal, Vol II, No.3, 3rd Quarter, 1996.
Alder, Reuel, Today's Software Demands Good CM, Crosstalk, Feb 1998.
Alsup, M., Knowledge Management Is A Siren's Song, Document Management, Vol. III Issue 2, April 1998.
Anderson, Duane, Design Changes Affecting Plant Configuration, Sept/Oct 1995, ACDM Journal.
Anon, Successful Data Management, Computer-Aided Engineering: CAE, v13, n2, Feb 1994, pp.23.
Arnold B., Version Control System Software, PC Week, 5/11/92, pp. 96-97.
ASME, Engineering Data Management: Key to Success in a Global Market. 7th Annual Database Symposium, International Computers In Engineering Conference, San Diego, CA., Aug. 1993, ASME.
ASQ, Technical Papers of the Technical Conference- American Society for Quality Control, 1st West Coast CM Symposium, Anaheim, CA., August 1965.
Barnhart, K., CM: The Time is Now, A-E-C Automation newsletter, 8/96.
Bartuli, G., The Best of Both Worlds, Available from PDMICS Web Site.
Beaumont, L. R., IS0 90Ol - the Standard Interpretation: The International Standard System For Assuring Product & Service Quality, ISO Easy, Middleton, NJ, 1994.
Berstoff E.H. , Elements of Software CM, IEEE Transactions on Software Engineering, Vol. SE-10., 1/84 pp. 79-87.
Bersoff, Vilas, Henderson, & Siegel; Software Configuration Management: a Tutorial, Computer, 1/79, pp. 6-14.
Berlack, H. R. Hardware & Software Configuration Control & History & Current Status; Proceedings of the Technical Symposium & Annual Assembly, 1982.
Berlack, H. R. , Hardware & software configuration control & history & current status. Proceedings of the Radio Technical Commission for Aeronautics, Wash. DC,11/81, pp. 165-194.
Berlack, H. R., Evaluation and Selection of Automated CM Tools, Crosstalk Nov-Dec 1995.
Bjorn P., Improving Cooperation in a CM System.
Bjorn, P., Uniform Versioning: The Change-Oriented Model.
Bjorn P., Versioning in a Software Engineering Database: The Change Oriented Way.
Bowler, R.T.E., Riddick, R.P., Analysis of Changes in the Aegis Cruiser Shipbuilding Program, Naval Engineers Journal, May 1987, V99, n3, pp.173-180.
Boznak, R.G., Reducing Hidden Cost - A New Look at CM, International Industrial Engineering Conference, Toronto, Canada, 1989, pp.47- 52, Institute of Industrial Engineers.
Bray, O., Hess, M., Reengineering a CM System, IEEE Software, v12, 1995.
Bridges, M. C. , A Proven Software Project Audit Methodology. NAECON 1986.
Proceedings of the National Aerospace & Electronics Conference, Dayton, OH, Vol. 1. New York: IEEE.
Brown, E.D., Implementation of a CM System At Sizewell B, International I Mech E Conference, London, March 1994, pp.191-198.
A. Brown, S. Dart, P. Feiler, K. Wallnau, The State of Automated CM, SEI-92-TechReview-005, Research Access Inc.
Brummer B. , The Case for a CM Body of Knowledge, ACDM Newsletter, June 1994, p.1.
Buckley, K. F., CM - Key to Process Improvement SME Autofact '93 Conference, Chicago, Nov. 1993, PP.MS93-251.
Buckley, F. J. 1985. Software Quality Assurance Special Interest Committee.SIGSOFT, Software Engineering Notes, Vol. 10, No. 1, pp. 59-61.
Burger, A.M., Reynerson, D.M., Enterprise Technical Information & CM Systems, Nuclear Plant Journal , V12, n5, 1994, pp@62-64.
Burton T., Software CM Helps Solve Year 2000 Change Integration Obstacles, Crosstalk Jan 1998
Bylinsky, G., Fast-Selling Software That Hurries Products To Market, Fortune Magazine, 4/29/96. [PDM article].
Campbell, Roy H. & Render, Hal S., The Design Of The CLEMMA
Configuration Library System, LC Call No: QA76.14 no. 1458 QA76.76.D47 Dept of Computer Science, University of Illinois at Urbana-Champaign, 1988.
Canal, B., Integrating/Interfacing PDM with MRPII, available from PDMICS Web Site.
Central Computer & Telecommunications Agency, CM, 1990, H.M.S.O. London, ISBN: 0113305303.
Childe, S. J., Maul, A. S., Bennett, J., Frameworks for Understanding Business Processs Re-Engineering, International Journal of Operations & Production Management, V14, nl2, 1994.
Chruscicki, & Sheffield, The JOVIAL J73 Programming Support Library & Configuration Control Tool; Digital Aulonics Systems Conference, St. Louis, 11/7-19/81, Collection of Technical Papers. New York: American Institute of Aeronautics & Astronautics, pp. 459-462.
Clarke, M; Information Enabled Manufacturing; Document Management, January/February 1997.
Compton, S.B., Connor, G., CM for Software, Van Nostrand Reinhold, 1994.
Conde, D. Bibliography on Version Control & Configuration Management. ACM SMSOFT, Software Engineering Notes, 1986, No. 3, pp. 81-84.
Conley, D.T., Configuration Status Accounting Made Affordable, Naval Engineers Journal, Nov. 1991, pp.63-70.
Conradi, R., Software CM:ICSE 1997 SCM-7 Workshop, Boston, MA, MAy1997. Proceedings, Springer, Berlin 1997, ISBN 3-540-63014-7.
Cooper, S.D., Report on the Second UK Software Maintenance Workshop, ACM SIGSOFT, Software Engineering Notes, 1989, Vol. 14, No. 5, pp. 124-129.
Couglan F., Representative Change/Configuration/Problem Management Tools,Software, 5/92, pp. 60-62.
The Past, Present & Future of CM, SEI-92-TR-008.
Dart, S. , Spectrum of Functionality in CM Systems , SEI-90-TR-011.
Dart, S., Achieving the Best Possible CM Solution, Crosstalk Sept 1996
Dart , S.,Configuration Management Meets the Needs of the Web http://techrepublic.com.com/5100-6313-5024990.html
Davies, H.; Real-World User Requirements for Industrial Document Management; Document Management, January/February 1997.
Dvorak, P., Integrating Technologies, 1996 CAD/CAM Planning Guide [PDMarticle].
Easterbrook S., Gain P., Griffen C., Rogers L, Keeping up with CM, panel discussion: Audio-tape from proceedings of EDMS (Electronic Document Management systems) Focus 94, Orlando FL, 2/94. Available from Magnemedia, 407-351-1119.
Easterbrook S. , Looking for Revs in all the Wrong Places, ACDM Journal, June 1994, p.2.
Easterbrook S., I Wanna Know What CM Is- I Want You to Tell Me..., ACDM Journal, April 1994, p6.
Easterbrook S., Is CM a Process for Achieving ISO Quality Assurance Requirements?, ACDM Journal, Sept/Oct 1995.
Easterbrook S., PDM, The Hype & the Hope, 1st Quarter, 97, Vol III, No.1, ACDM Journal, Sept/Oct 1995.
Easterbrook, S., An Introduction to CM, ACDM Journal, December, 1995.
Easterbrook, S., Selling Change Management, ACDM Journal, December, 1995.
Easterbrook, S., ISO Is Full of CM Requirements. ACDM Journal, 4th Qtr, 96.
Easterbrook, S., Signatures, ACDM Journal, 2nd Qtr, 98.
Ebner H. , The Real World of Information Change Management, ACDM Journal March/April 95.
Ebner, H. A Performance Based Quality Assurance Records System, ACDM Journal 2nd Qtr, 96.
Engineering Automation Newsletter, April, 1996, Sherpa Moves PDM to Next Level. [PDM article].
Estublier, J, Software CM:ICSE SCM-4 and SCM-5 Workshops: Selected Papers, Springer, Berlin, 1995 ISBN 3-540-60578-9.
Feiler H., Downey G., Transaction-Oriented CM: A Case Study, SEI-90-TR-023.
Feiler, P (editor), Proceedings of the 3rd International Workshop on Software CM (Trondheim, Norway), 1991, ACM Press ISBN: 0897914295.
Feiler, P., CM Models in Commercial Environments, SEI-91-TR-007.
Fohrman, W. G. 1979. Observations on configuration management. Part of Bryan, W., C. Chadbourne, & S. Siegel. Tutorial: Software Configuration Management. Silver Spring, MD, 1980, IEEE Computer Society Press, pp. 19-22.
Fowler, A., Models & Applications of CM, International Journal Of Management Science, V21, n4, 1993, pp.425-431.
Fowler, A., Quality Led Applications of CM, Quality & Its Applications International Conference, Newcastle UK, 1993, pp. 227-233, Penshaw Press.
Friedman, S., Selling CM, ACDM Journal 3/96.
Fulcher J., The Evolution Continues, Manufacturing Systems, August, 1996. [PDM article].
Galagan, P., Beyond Hierarchy: The Search for High Performance, Training & Development, 8/92, p. 21.
Gain, P., CM, Computer-Aided Engineering, November, 1996.
Gain P., Focus On: CM, 1st Quarter, 97, Vol III, No.1, ACDM Journal, Sept/Oct 1995.
Gentleman, W, Managing Configurability in Multi-installation Realtime Programs, available from National Research Council of Canada (see last page of this guide), NRC No. 30938.
Gentleman W, MacKay S, Stewart D, Wein M, Commercial Realtime Software Needs Different CM, from proceedings of the 1992 ACM/SIGAPP Symposium on Applied Computing (SAC) (Kansas City, KS), available from National Research Council of Canada (see last page of this guide), NRC No. 30939.
Giffen, Rollen, Using Benchmarking to Enhance Your CM/DM Process, ACDM Journal, Vol II, 3rd Quarter, 1996.
Gill, T., Stop-Gap Configuration Management, Crosstalk, February 1998. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Gordon, Michael, Combining Version Control with Automatic Program Building, ACM SIGSOFT, 1989, Software Engineering Notes, Vol. 14, No. 6, pp. 25-31.
Gordon, Michael, Combining Version Control with Automatic Program Building, ACM SIGSOFT, Software Engineering Notes, 1989, Vol. 14, No. 6, pp. 25-31.
Hajek, Victor G. CM, 1968, London, Industrial & Commercial Techniques, ISBN 0850890071.
Hall, M.N., Reducing Long term System Cost by Expanding The Role of the System Engineer, Proceedings of the 1993 International Symposium on Technology & Society, Washington DC, Oct 22-23 1993, pp-151-155, IEEE.
Hancock, D.C., Lowrie, D.A., Integrated information Systems in Support of CM, Proceedings of the 52nd Annual Meeting of the American Power Conference. v52, Chicago, April 29,1990, pp.921-926. Illinois Institute of Technology.
Hancock, L.R., Enhancing Operability & Reliability Through CM, Proceedings of the 2nd ASME-JSME Nuclear Engineering Joint Conference, San Francisco, Mar 21-24, 1993, pp. 707-709, ASME.
Haque, T., The F-16 Software test Station Program: A Success Story in Process CM, Crosstalk Nov 1997
Haque, T., Process-Based CM: The Way to Go to Avoid Costly Product Recalls, Crosstalk April 1997
Haque, T., Introducing Process into CM, Crosstalk Jun 1996
Harvey, K., Summary of the SEI Workshop on Software CM.
Heimbigner, Dennis, & Steven Krarie. A Graph Transform Model for Configuration Management Environments; Proceedings of the ACM ~ SIGSOFT / SIGPLAN Software Engineering Symposium on Practical Software Development Environments. New York: Association for Computing Machinery. 1988.
Howk C. & Weir S. , CM: A Simplified Approach, A-E-C Automation Newsletter, 3/94, Technology Publications.
Heath, G; Viewing & Workflow: Speeding the Process; Document Management, January/February 1997.
Heimbigner, Dennis, & Steven Krane; A Graph Transform Model for Configuration Management Environments; Proceedings of the ACM SIGSOFT / SIGPLAN Software Engineering Symposium on Practical Software Development Environments. 1988, Association for Computing Machinery.
Henderson, P. Proceedings of the ACM SIGSOFT / SIGPLAN Software Engineering Symposium on Practical Software Development Environments 1988, Association for Computing Machinery.
Henning, S., Using a Configuration Management (CM) System to Manage Web Content and Web-Based Distributed Software Development, http://www13.w3.org/Authoring961001/henning.html
Heun, Christopher; To Limit Life Cycle Costs, Data Control is Tightened; National Defense Magazine, 9/97 p. 32.
Hillyard, R., Web-based Document Management Puts the Internet to Work; Document Management, January/February 1997.
Hoff, R., Successful EDMS Implementation: Initial Study, Document Management, Vol. III Issue 2, April 1998.
Hoff, R., Successful EDM Implementation: Requirements Analysis, Document Management Magazine Vol IX, Issue 1, 1999
Huff, C. Spinning A Web: CM Research on the World Wide Web, SEI- 94-TR-018 IBM Corporation; IBM System/370; Tracking & Resolving Problems & Coordinating Changes, IBM Technical Bulletin, Publ. No. GG22-9000, 67 pp.
IBM Corporation; Problem & Change Control at the State of Washington Data Processing Service Center, 1977, Publ. No. GK20-1073, 12 pp.
ITS Cooperative Deployment Network, "TMC Pooled-Fund Study Releases New Configuration Management Handbook"
Jagannathan, V., Raman, R.S., Role of CM Systems in a Concurrent Engineering Environment, Proceedings of the ASME Winter Annual Meeting, Anaheim, CA USA. Nov. 8-13, 1992, pp.1 -8, ASME.
Julien, S., Rohr Tackles Time & Space With New Document Management System; Document Management, January/February 1997.
Karn, A.R., Runnerstrom, E. Expanding Planning Yard Concept & Configuration Accounting, or Improving Navy Ship Engineering, Journal of Ship Production, Nov. 1986, V2, n4, pp.238-244.
Kempfer, L., Managing Processes, 1996 CAD/CAM Planning Guide [PDM article].
Kensinger, S., Re-Engineering Engineering: Putting the Cart before the Horse!, Computer-Aided Engineering.April 1998, pp 62-66.
Kidd C., Costing the CM Activity, An ABC Perspective, British Production & Inventory Control Society Conference Proceedings, 12/93.
Kidd, C., Counting The Cost Of Change: An Activity Based Management Approach, 28th Annual Conference British Productivity & Inventory Control Society, Birmingham UK, Nov 1993, pp. 391-404.
Kidd, C., Taking Control of Change, Journal of Design & Planning, 2/91.
Kidd, C., CM- the Missing Link?, Institute of Management Services, 3/91.
Kidd, C., Enhancing the Role of Document Management, Professional Engineer Magazine, 5/91.
Kidd, C., European CM Survey, prepared for the University of Leeds, 2/94.
Kidd, C., A Report on ISO 9004 Part 7, prepared for the University of Leeds, 5/94.
Kidd, C., Planning & Control for Effective Change Management, prepared for the University of Manchester, 9/92.
Kienle, Steven C., & William A. Keller, Problem Report Forms: A System for Software Configuration Management. 1988. ACM SIGSOFT, Software Engineering Notes, Vol. 13, No. 4, pp. 79-84.
Kingsbury, J., Adopting SCM Technology, Crosstalk Mar 1996.
Kirwan, Mary Jo & Worm, Laurel, Benefits of EDMS Abound... If You Know Where To Look, Document Management, Vol VII, Issue 2, March/April 1997, p.21.
Klein, R. Shortcomings of Requirement Documents, Journal of Systems management, 10/92.
Kline, M. Software & Hardware R & M: what are the differences? Proceedings of the Annual Reliability & Maintainability Symposium, San Francisco, CA, 1/22-24/1980. pp. 179-185.
Koppel & Mitchell , CODAM-1, An Introduction to Air Force Systems Management, 1964, Paragon Design Co.
Koppel & Mitchell , CODAM-2, Systems Management, 1965, Paragon Design Co.
Koppel & Mitchell , CODAM-3, Systems Management, Definition Phase, 1965, Paragon Design
Koppel & Mitchell , CODAM-4,Systems Management, Acquisition Phase,1965, Paragon Design
Koppel & Mitchell , CODAM-5, Systems Management, Operational Phase, 1965, Paragon Design
Koppel & Mitchell , CODAM-6,Systems Management, An Introduction to AFSC/AFLC Contractor Data Requirements, 1965, Paragon Design
Koppel & Mitchell , CODAM-7, Systems Management, An Introduction to Air Force System Engineering Management,1965, Paragon Design
Koppel & Mitchell , CODAM-8, Systems Management, An Introduction to Air Force CM, 965, Paragon Design
Krishnamurthy, K., Low, K.H., Towards a Formal Model of Version & CM for Collaborative Engineering, Proceedings of the ASME Database Symposium, Engineering Data Management. Integrating the Engineering Enterprise, Minneapolis, Sept 11-14, 1994, pp.21-32.
Lamine, Slim Ben, La Configuration de Logiciels et les Systems d' Information (masters Thesis) (e_mail benlamin@ift.ulavat.ca).
Larimer, S. J Managing software in a continuously reconfiguring multi-microprocessor system, Proceedings, Joint Automatic Control Conference, Charlottesville, VA, 6/17-19 /81, Vol.1; American Institute of Chemical Engineers.
Lewyn, M., Flying in Place: The FAA's Air-Control Fiasco, Business Week, 4/26/93, p. 87.
Lindgren, J. R., Solitario, W.A., Moore, A.P., Strieff, M-A, CAD/CAM Goes to Sea. The SA'ARs Design & Construction, Naval Engineers Journal,V104, n3, 1992, pp.148-155.
Littlewood, B., & L. Strigini, The Risks of Software. Scientific American, 11/92, pp. 62-75.
Lohr, Greg, Process an Engineering Change Order (ECO) Faster, Document Management, Vol VII, Issue 2, March/April 1997, p.36.
MacKay, Stephen A., The State of the Art in Concurrent, Distributed CM, from proceedings of the 5th International Workshop on Software CM (Seattle, WA, 1995), available from National Research Council of Canada (see last page of this guide), NRC No. 38378.
Mackay, Stewart, Wein, Evolution is Essential for Software Tool Development, from proceedings of the 1995 International Workshop on Computer- Aided Software Engineering (Toronto, Ontario, Canada) , available from National Research Council of Canada (see last page of this guide), NRC No. 38359.
Mahler, Axel, & Andreas Lampen, An Integrated Toolset for Engineering Software Configurations.), Proceedings of the ACM SIGSOFT / SIGPLAN Software Engineering Symposium on Practical Software Development Environments. 1988, New York: Association for Computing Machinery.
Marshall, A., Software CM: Function or Discipline?, Crosstalk Oct 1995.
Marshall A.J., Demystifying Software CM, Crosstalk May 1995.
Malopy, L., Systems Engineering & CM, 1st Quarter, 97, Vol III, No.1, ACDM Journal, Sept/Oct 1995.
Mehlman, L., Implementing a Paperless Environment: The NAVSTAR GPS Block IIF Engineering Managment System Project, Crosstalk Mar 1988
Meiser, K., Terms in Transition: Software CM Terminology, Crosstalk Jan 1995.
Menkus, B., CM, Journal of Systems Management v41, n6, 1990.
Merlenbach, C., Importance of CM. An Overview with Test Program Sets, Proceedings of 48th Annual Forum of the American Helicopter Society,Washington DC, pt. 1, Jun. 1992, pp.315-323, American Helicopter Society, Alexandria Virginia.
Miller, E., Seeing the Forest, CIO, May 1,1996. P. 72 [PDM article].
Mirecki, Ted. 1991, Programs Tame Software-Revision Cycle, PC Week, 2/18/91, p. 103 .
Morgan, A.M., CM - a Human View, 2nd International Conference on Quality Management, vi, Edinburgh, July 1994, pp.703-716.
Mosley, V., Brewer, F., Heacock, R., Johnson, P., LaBarre, G., Mazz, V., & Smith, T., Software CM Tools: Getting Bigger, Better and Bolder, Crosstalk Jan 1996
Mourn, J.D, Central Ship Logistics & Engineering Configuration Accounting', Naval Engineers Journal, vlOO, nl, 1988, pp.53-62.
Murray, John, Problem reporting & development tracking using VM/SP . 1988, Report on the First International Workshop on Software.
Neil, George, Software Acquisition Management Guidebook: Reviews & Audits, System Development Corporation, 1/78.
Nixon, W.J., Utilization of a Single Bill of material to Support CM Requirements of a New Navy Destroyer Program, A Case Study, Aerospace & Defense Symposium, Washington, March 1990, pp.41-44.
Palmer, Craig., Bringing design & procurement together, Mechanical Engineering, Vol.118/No.4 April, 1996. P. 77. [PDM article].
Parallel Performance Group, Sedona, AZ, a series of e-mail newsletters on high-tech software topics.
Parikh Girish, Exploring the world of software maintenance, 1986, ACM SIGSOFT, Software Engineering Notes, Vol 11, No. 3, pp. 88-92.
Pedotto A., Focusing on Configuration, Arizona Business Magazine, Spring 1994, p.12.
Peters, A.M.,The role of P& IC in engineering change management. Journal of the American Production & Inventory Control Society, 1982, pp.84-87.
Proceedings of the 2nd International Workshop on Software CM, ACM Software Eng. Notes, 11/89, ISBN: 0897913345.
Proceedings of The Sixth Annual Software Technology Conference: April 1994, STC-94-PROC Ramakrishnan, Ram, Integrate Digital Signatures Into Your Document Management Product, Document Management, Vol VII, Issue 2, March/April 1997, p.14.
Rickabaugh J., CM: The Hidden Friend in Business Re-Engineering, Industrial Engineering Magazine, 8/94.
Riding R., CM in a Training Environment, ACDM Journal, Jan/Feb 95.
Robbins, D. W., Software Configuration Control in a Real-Time Flight Test Environment. In NAECON 1982: Proceedings of the National Aerospace & Electronics Conference, Dayton, OH, Vol. 1. N.Y., IEEE.
Rudy, M.,Ten Steps to Ensuring a Successful PDM Project, ACDM Journal, 2nd Quarter, 96.
Rummler, G., Managing the White Space, Training & Development, 8/92, page 26.
Shani, A.B., Rogberg, M., Quality Strategy & Structural Configuration, Journal of Organisational Change Management, v7, n2, 1994.
Samelson, Q., The Problem with Significant Part Numbering Systems, presented at the Annual APICS Conference (San Antonio) 10/93.
Sawatzky, Walter CM/DM: Information Management with an Attitude, ACDM Journal, Vol II, No. 33rd Quarter, 1996.
Sandlas, R., Knowledge Management is Nothing New, Document Management Magazine, Vol IX, Issue 1, 1999.
Stover, R., Enterprise Resource Management: Optimizing Use of G2000 Corporate Information Assetts: A White Paper, Document Management Magazine Vol IX, Issue 1, 1999.
Schwartz, David P,. 4th Meeting of IEEE Working Group, Software Configuration Management. ACM SIGSOFT, Software Engineering Notes, 1985, Vol.10, No. 1, pp. 68-73.
Searle, Lloyd V., An Air Force Guide to Computer Program Configuration Management. System Development Corporation, 10/77.
Seshadri, S.; Breakthrough Web & Object Oriented Technology Enables PDM Digital Mock-Up; Document Management, January/February 1997.
Smith, P.R., Cook, R.A., CM. Are you Operating the Plant You Licensed?, Nuclear Plant Journal, v9, n7, 1991, pp.85-86.
Snelting, G.and Zeller, A., Incremental Configuration Management Based on Feature Unification (Computer Science Report 94-04)
Sommerville, I., Software CM:ICSE 1996, SCM-6 Workshop, Berlin Germany, Mar 25-26, 1996 Springer-Berlin, ISBN: 3-540-61964-X.
Sorensen, R., Comparison of Software Development Methodologies. CrossTalk, January1995. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorensen, R., MIL-STD-498 and the CMM: How Do They Relate? CrossTalk, Nov/Dec 1995. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorensen, R., MIL-STD-498 and the CMM: How Do They Relate? CrossTalk, Nov/Dec 1995. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorensen, R., MIL-STD-498 and the CMM: The Mapping, CrossTalk , Feb 1996. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorensen, R., Adopting MIL-STD-498: The Steppingstone to the U.S. Commercial Standard. CrossTalk, March 1996. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorensen, R., MIL-STD-498, J-STD-016, and the U.S. Commercial Standard. CrossTalk, June 1996. www.stsc.hill.af.mil/cm/index.html#Crosstalk
Sorenson, R., Document Management Awareness is Increasing, Crosstalk Feb 1994.
Sowell, P., Firmware Configuration Management, a Case History, NAECON: Proceedings of the National Aerospace & Electronics Conference, 1980, Dayton, OH, Vol. 1. New York: IEEE.
Stanfield, J. R., & A. M. Skrukrud Software Acquisition Management Guidebook: Software Maintenance. System Development Corporation, 11/77.
Steeman N., Management the Way it Ought to Be, ACDM Journal March/April 95 & ACDM Journal 2nd Qtr, 96.
Stevens, C.A., Wright, K., Managing Change With CM, National Productivity Review , Autumn 1991, pp. 509-518.
Stevens C. & Land R, Managing Change with Configuration-Value Management, Society of American Value Engineers, 1994 International Conference 4/94.
Stinson, Willis, Views of software development environments: automation of engineering & engineering of automation. 1989, ACM SIGSOFT, Software Engineering Notes, Vol. 14, No. 5, pp. 108-117.
Smallwood, R.; The Document Management & Workflow Challenge in Manufacturing Document Management, January/February 1997.
Starbuck, R., Software CM: Don'y Buy a Tool First, Crosstalk Nov 1997
Starbuck, R., Software CM by Mil-Std-498, Crosstalk Jun 1996
Summary of Available CM Related Documents from SEI http://www.sei.cmu.edu/legacy/scm/scmDocSummary.html
Tady, D., If You Want A Sure Pay Off Implement CM!, 1st Quarter, 97, Vol III, No.1,ACDM Journal, Sept/Oct 1995.
Takaliker, Sunil; Leveraging PLM for manufacturing excellence (2003); http://www.expresscomputeronline.com/20040419/technology01.shtml
Third International Workshop on Software CM, 1991, ISBN 0-89791- 429-5, IEEE Computer Society Press, $32.00.
Tomayko, James E., Support Materials for Software CM, SEI-SM-004
Tomayko, James E., Software CM, SEI-CM-004
Tanna, J. Document Management Grows Up; Document Management, January/February 1997.
Trego, L., Configuring aircraft on-line, Aerospace Engineering, 7/96 P.27
.
TRW Defense & Space Systems Group, Software Configuration Management Procedure for GEODSS;1983, Maui, HI: FSCM No. 11982
Urban, S. D., Shah, J. J., Rogers, M. T.,Engineering Data Management: Achieving Integration Through Database Technology, Computing & Control Engineering Journal, v4, n 3, June 1993, pp.119-126.
U.S. Government, Comptroller General. Report to the Congress of the United States: Contracting for Computer Software Development, Serious Problems Require Management Attention to Avoid Wasting Additional Millions, Washington, DC, GAO, 11/79.
U.S. Government, Department of Commerce, Configuration Management: Software. 1988, National Technical Information Service.
Van der Hoek A., Hall R., Carzaniga A., Heimbigner D.& Wolf L., Software Deployment: Extending CM Support into the Field, Crosstalk Feb 1998
Van Nederynan S. , DOE Learning lessons from Poor CM, ACDM Journal, p.10, 11/94.
Van Nederynan S. , Ways to Communicate Configuration Information, ACDM Journal, 11/94.
Van Tilburg, R. L., & Schwartz D.P.; Final status on the IEEE Guide to Software Configuration Management. ACM SIGSOFT, 1986, Software Engineering Notes, Vol. 11, No. 3, p. 87.
Veith, W,. CM, Mechanical Engineering, Feb. 1967, pp-20-25.
Ventimiglia, R., Challenges & Trends in SCM Automation: A Practitioners View, Proceedings of the 8th annual Software Technology Conference,available from the Software Technology Support Center, Hill AFB, UT.
Ventigmiglia, R. Effective Software Configuration Management, Crosstalk, Feb 1998
Version & Configuration Control. ACM SIGSOFT, Software Engineering Notes, Vol. 13, No.4, pp.61-78.
Voeller, J.G., Rebirth of Nuclear Power, A New Opportunity For CM, Proceedings of the 53rd Annual Meeting of the American Power Conference. v53, pt2, Chicago, April 29, pp.1073-1076, Illinois Institute of Technology, Chicago.
Wallnau, K., Issues & Techniques of CASE Integration with CM, SEI- 92-TR-005 Watts, Frank, Engineering Changes: A Case Study, Journal of the American Production & Inventory Control Society (APICS), Fourth Quarter, 1984.
Wiebe, D., Generic Software CM: Theory & Design, UWASH-CSE-90-07- 003, Research Access Inc.
Whiteside, J.; Installing Workflow in an Industrial Application; Document Management, January/February 1997.
Wiack R., Selling CM, ACDM Journal, p. 2, 11/94.
Wilkens, D., Justifying an Information Management System, Document Management, January/February 1997.
Williams T., Reenginnering to Build Capabilities, Johnson Controls ASG Quarterly, 49200 Halyard Dr, Plymouth, MI 48170 313-454-5000.
Winkler, Jurgen, Report on the First International Workshop on Software Version & Configuration Control. ACM SIGSOFT, 1988, Software Engineering Notes, Vol. 13, No. 4, pp. 61-78.
Works, Madden T., Configuration & CIM: SME White Paper, 1987, LC Call no. TS155.6.C67 1987, SME, PO Box 930, Dearborn MI 48121.
Young, J.C., Change & Configuration Management Gathering. ACM SIGSOFT, Software Engineering Notes, 1989, Vol. 14, No. 5, pp. 105-107.
Zendle, H. , A Software Management Doctrine for the 80s. Proceedings of the National Aerospace & Electronics Conference, Dayton, OH; 11/19- 21/81, Vol. I, pp. 197-204. IEEE.
Zucker, S., Automating the Configuration Management Process, NAECON 1983: Proceedings of the National Aerospace & Electronics Conference, Dayton, OH, Vol. 1. New York: IEEE.